Pink GWM Ora 5 Window Tint in Rayno Phantom S9 (35% and 75%)

This week a bright pink 2027 GWM Ora 5 came into our Kingswood workshop for a full set of window tints. It's a car that turns heads, and the owner wanted to keep it looking sharp while making the cabin far more comfortable heading into a Western Sydney summer. If you've been searching for window tinting Penrith locals trust, this job is a good example of how we approach it.

The owner chose our luxury tinting package, with the full vehicle done in Rayno Phantom S9. We fitted 35% on the front side windows, the darkest you can legally go there, and 75% on the rear side windows and rear windscreen, because the Ora already has factory privacy glass in the back. You can read more about our films, shades and process on our window tinting page.

The goal was simple. Protect the driver and passengers from UV, cut down the heat building up inside, and give the Ora a clean, finished look that suits that bold pink paint.

Why cabins get so hot in summer

Sunlight carries three things into your car: visible light, ultraviolet (UV) and infrared (IR). Visible light is what you see and what causes glare. UV is the part that damages skin and fades interiors over time. Infrared is mostly what you feel as heat on your arms and the back of your neck.

When that energy passes through untinted glass, it gets absorbed by the seats, dash and trim, and the cabin warms up quickly. Parked in an open car park in Penrith on a summer afternoon, a car can become uncomfortable to get into, and the air conditioning has to work hard to bring it back down.

Modern cars like the Ora 5 tend to have a lot of glass, which is great for visibility and a light, airy feel. The trade-off is more surface area for the sun to come through. That's exactly why a good quality film makes such a noticeable difference.

Why we chose Rayno Phantom S9

Not all tint is the same. Cheaper dyed films mostly just darken the glass, which reduces glare but does little to stop heat. Ceramic films are built differently, using ceramic particles that reject heat and block UV without needing to be extremely dark.

Rayno Phantom S9 sits in Rayno's ceramic range, and it's a film we're confident fitting as Rayno certified installers. It gives the owner strong UV protection and heat rejection, keeps the glass clear to look through, and won't interfere with phone signal or electronics the way some metallic films can. For a car that's going to spend plenty of time in the Australian sun, it's a sensible choice.

Step one: preparing the glass

Every good tint job starts with clean glass. Any dust, residue or tiny particle left on the window will show up as a bump or speck under the film, so preparation is where the quality is decided.

On the Ora, we cleaned each window thoroughly inside and out, paying attention to the edges and seals where grime likes to hide.

Step two: cutting and shaping the film

Once the glass is prepped, the film is cut and shaped to suit each window. Side windows are fairly simple, but curved glass, like a rear windscreen, needs the film heat-shaped so it sits flat and follows the curve without creasing.

This is the part that separates a neat, long-lasting tint from one that lifts or shows gaps at the edges. Taking the time here means the film lines up cleanly with the glass and looks like it came from the factory.

Step three: fitting the right shades

With the film shaped, we installed it across the whole car. The front side windows were done at 35%, and the rear side windows and rear windscreen were done at 75%.

Those numbers refer to visible light transmission, or how much light passes through the film. Under NSW tint laws, 35% is the darkest you can legally go on the front side windows. The rear glass on the Ora 5 already comes with factory privacy tint, so it was dark to begin with. Rather than stacking a dark film on top of it, we fitted a light 75% Rayno Phantom S9 film over the privacy glass. That adds the ceramic film's UV and heat rejection to the back of the car without making it any darker, and keeps everything within NSW tint laws. There's more detail on legal limits on our tinting page.

The lighter front windows keep visibility good for the driver, especially at night, while the factory privacy glass in the back still gives passengers shade and keeps belongings out of sight.

The result

The owner drove away with a GWM Ora 5 that looks even sharper. The tint frames that pink paintwork nicely and gives the car a more finished, premium appearance from every angle.

More importantly, the cabin is now protected from UV and noticeably better at handling the heat. It's perfectly set up for summer, with less glare, more privacy and a more comfortable ride for everyone inside.

If the owner ever wants to protect that paint as well, it would pair nicely with a ceramic coating for gloss and easier washing, or paint protection film on the front to guard against stone chips.

Looking after your new tint

New tint needs a little care while it settles and over the long term. Here's what we recommend:

  • Leave the windows up for the first few days so the film can cure and bond properly to the glass.

  • Don't worry if you see a slight haze or small water pockets early on. This is normal moisture drying out and will clear as the film cures.

  • Clean tinted windows with a soft microfibre cloth and a gentle, ammonia-free glass cleaner.

  • Avoid scrapers, abrasive pads or anything sharp on the inside of the glass.

  • Be careful with seatbelt buckles, rings and loose items that could knock or scratch the film.

  • Don't stick suction mounts, parking permits or stickers onto tinted glass.

  • Keep the rest of the car clean with regular washes or a maintenance detail so the whole car stays looking its best.

Window tinting near Penrith

All our tinting is done in-house at our Kingswood workshop on Copeland Street, just minutes from Penrith. We regularly tint cars for owners from St Marys, Mount Druitt, Blacktown, Emu Plains and the Blue Mountains, and you can see every suburb we cover on our service area page.

Want to know more about the team behind the work? Head to our about us page, or get in touch to ask about tint for your own car. You can also find all our services on the PRO SPEC Detailing home page.

PRO SPEC Detailing · Kingswood, Penrith

Want tint like this Ora 5?

Send us a few photos of your car and we'll come back with a free, tailored quote for Rayno ceramic window tint, paint protection film or a ceramic coating.

Next
Next

Red MK7.5 Golf GTI: Paint Correction, Graphene Coating & Ceramic Tint